Asterisk is a complete PBX in software. It runs on Linux, BSD, Windows and OS X and provides all of the features you would expect from a PBX and more. Asterisk does voice over IP in four protocols, and can interoperate with almost all standards-based telephony equipment using relatively inexpensive hardware.
Asterisk provides Voicemail services with Directory, Call Conferencing, Interactive Voice Response, Call Queuing. It has support for three-way calling, caller ID services, ADSI, IAX, SIP, H.323 (as both client and gateway), MGCP (call manager only) and SCCP/Skinny. Check the Features section for a more complete list.
Asterisk needs no additional hardware for Voice-over-IP, although it does expect a non-standard driver that implements dummy hardware as a non-portable timing mechanism. A single (or multiple) VOIP provider(s) can be used for outgoing and/or incoming calls (outgoing and incoming calls can be handled through entirely different VOIP and/or telco providers).
For interconnection with digital and analog telephony equipment, Asterisk supports a number of hardware devices, most notably all of the hardware manufactured by Asterisk's sponsors, Digium. Digium has single and quad span T1 and E1 interfaces for interconnection to PRI lines and channel banks. In addition, single to quad port analog FXO and FXS cards are available and are po***r for small installations. Other vendors' cards can be used for BRI (ISDN2) or quad- and octo- port BRI based upon CAPI compatible cards or HFC chipset cards.
Lastly, standalone devices are available to do a wide range of tasks including providing fxo and fxs ports that simply plug into the LAN and register to Asterisk as an available device.
Asterisk provides Voicemail services with Directory, Call Conferencing, Interactive Voice Response, Call Queuing. It has support for three-way calling, caller ID services, ADSI, IAX, SIP, H.323 (as both client and gateway), MGCP (call manager only) and SCCP/Skinny. Check the Features section for a more complete list.
Asterisk needs no additional hardware for Voice-over-IP, although it does expect a non-standard driver that implements dummy hardware as a non-portable timing mechanism. A single (or multiple) VOIP provider(s) can be used for outgoing and/or incoming calls (outgoing and incoming calls can be handled through entirely different VOIP and/or telco providers).
For interconnection with digital and analog telephony equipment, Asterisk supports a number of hardware devices, most notably all of the hardware manufactured by Asterisk's sponsors, Digium. Digium has single and quad span T1 and E1 interfaces for interconnection to PRI lines and channel banks. In addition, single to quad port analog FXO and FXS cards are available and are po***r for small installations. Other vendors' cards can be used for BRI (ISDN2) or quad- and octo- port BRI based upon CAPI compatible cards or HFC chipset cards.
Lastly, standalone devices are available to do a wide range of tasks including providing fxo and fxs ports that simply plug into the LAN and register to Asterisk as an available device.
